manualshive.com logo in svg

Proximus forum 523, Mounting And Commissioning Manual

Share
Download
Proximus forum 523 Mounting And Commissioning Manual Download Page 114

VoIP System Telephones

112

Voice over IP (VoIP)

PC Port

: Allows the telephone to be connected to a workstation computer. 

Use a non cross-over RJ45 patch cable to connect to the PC’s network 
port.

●

The VoIP system telephone’s power supply is provided by an extra plug-in 
power supply. It is also possible to provide a power feed via PoE (“Power 
over Ethernet”). PoE requires special devices for power feeds, as well as a 
completely wired RJ45 connection line.

●

You can also connect a standard headset via RJ45 sockets (DHSG 
standard) to VoIP system telephones.

●

VoIP system telephone’s audio signals are generated by the telephone 
itself. DTMF dial tones and Music on Hold are produced by the Media 
Gateway function.

●

A VoIP system telephone can also be operated without a permanent 
connection to the communications system, for example via VPN 
connection.

●

Signalling data for call control, call data during three-way conferences, 
connections to conventional terminals and external connections is 
exchanged between the VoIP system telephone and the communications 
system. During a call between two VoIP system telephones, call data is 
exchanged directly between the two VoIP system telephones.

●

During the device’s start procedure, the IP address is configured and the 
device software is requested via the DHCP and TFTP network protocols.

VoIP System Telephone Configuration

The VoIP system telephones Forum IPhone 525 and Forum IPhone 535 
obtain the required IP address configuration and operating software via the 
DHCP, BOOTP and TFTP IP protocols. After the power supply is assured, the 
device’s internal boot loader is started which controls the further start 
procedure.

Standard operating procedure is to contact the Forum 523/524’s DHCP 
server so that the start procedure can be concluded without problems. To 
register a new VoIP system telephone, proceed as follows:

1.

Temporarily remove the VoIP system telephone’s ethernet connection. 
Switch on the VoIP system telephone’s power supply. Note the MAC 
address shown in the display, for instance “MAC: 00:30:42:00:00:00”. 
Switch off the power supply.

Summary of Contents for forum 523





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands