manualshive.com logo in svg

Proximus forum 523, Mounting And Commissioning Manual

Share
Download
Proximus forum 523 Mounting And Commissioning Manual Download Page 67

Configuring the Forum 523/524

Configuration

65

Data not available for initial configuration can be updated or corrected at a 
later date. 

Starting the Web Console

1.

Start your Web browser. Enter the Forum 523/524 IP address in the 
“Address” box: http://192.168.99.254/.

If the configuration PC gets its IP address automatically from the 
Forum 523/524 or if the Forum 523/524 is entered as the domain name 
server, you can also start the Web console by entering the DNS name. The 
DNS name in the factory setting is 

host.domain

. You can change this in the 

Configurator

 (

Network: LAN

 menu).

2.

The Forum 523/524 Web console is started. During initial configuration, 
you have to update the system software first. Click the 

Browse

 button. 

Select the system software file that is stored on the PC (“*.bin”). Confirm 
with 

Load

. The update takes a couple of minutes, after this a new page is 

displayed in the browser.

3.

First set the country in which you are operating the Forum 523/524, and in 
which language the Web console is to be displayed.

Summary of Contents for forum 523





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands