manualshive.com logo in svg

Proximus forum 523, Mounting And Commissioning Manual

Share
Download
Proximus forum 523 Mounting And Commissioning Manual Download Page 218

Headset

216

Forum Phone 515/525/535: Extensions and Accessories

Headset

A headset can be connected to the Forum Phone 515/525/535 system tele-
phones and to the Forum IPhone 525/535 IP system telephones.

The headset must comply with the DHSG standard (connection via RJ45 jack). 
The manufacturers Plantronics and GN Netcom make devices suitable for this 
purpose. Alternatively, you can connect a “normal” headset (RJ11 jack) using 
an adapter. The headset must comply with DIN Norm EN 60950-1 Point 6.2 
(“Safety of information technology equipment including electrical business 
equipment”).

Connecting a Headset to a System Telephone

The connector for the headset is in the bottom of the system telephone’s 
casing and is indicated by this symbol

. 

1.

Plug the RJ45 jack on the headset cable into the socket provided. 

2.

Pass the cable through the recesses provided on the underside of the 
system telephone. 

3.

Activate the headset on the system telephone in the menu 

Phone 

settings: Headset

 (see also the system telephone’s user guide).

Summary of Contents for forum 523





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands