Proximus forum 523, Mounting And Commissioning Manual

Page: 31 / 228

Installation 29
Installation
To install the Forum 523/524 please perform the following steps in the order
suggested.
1. Check the scope of delivery (see Scope of Delivery on page 30), read
Safety Precautions starting on page 30 and information on Mounting
Location starting on page 33.
2. Open Forum 523/524 (see Opening and Closing Forum 523/524 starting
on page 33)
3. Install interface cards, if provided (see Interface Cards starting on page 37)
4. Mount the device on the wall ( Mounting starting on page 45)
5. Connect terminals (see Port Assignment, Termination, Cable Length
starting on page 46)
6. If available: externally connect S
0
to NTBA (see S
0
Ports starting on
page 46)
7. Plug power cord into power supply unit
8. Close Forum 523/524 (see Opening and Closing Forum 523/524 starting
on page 33)
9. Switch on power supply
Wait until the system is initiated (takes about 2 minutes). The system tele-
phone software is initialised automatically (the display will then show the
telephone’s internal phone number).
Call an external number to check basic functionality.
10. Connect PC/network to LAN1 for configuration
11. Close Forum 523/524
12. Open configuration software (Configurator) in the browser (see
Configuration starting on page 62); access data are:
Address (URL): http://192.168.99.254/
User: Administrator
Password: No password assigned
System PIN: 0000
13. Loading SW Updates (see page 73) and if applicable Resetting the System
Data (see page 73)