Mounting
Installation
45
Mounting
The device must be mounted in a suitable place. Please see the section on
starting on page 33 for details. The Forum 523/524 is
attached to the wall by means of 3 screws as shown in the diagram below:
Attachment diagram
Take the cover off the Forum 523/524 to screw in the screws for attachment
point B and insert the screws through the holes provided. The Forum 523/
524 will hang on the screws in attachment point A, so you must leave a space
of 4 mm between the screw heads and the wall.
6.
Tighten the Velcro fastener.
7.
Replace the cover and connect the power cable to
the power supply unit (see
A
B
B
266 mm
290 mm
Mounting hole
Mounting hole
Suspension (backside of device)
Summary of Contents for forum 523
Page 1: ...Forum 523 524 Mounting and Commissioning Manual ...
Page 10: ...8 ...