manualshive.com logo in svg

Proximus forum 523, Mounting And Commissioning Manual

Share
Download
Proximus forum 523 Mounting And Commissioning Manual Download Page 216

Key Extensions

214

Forum Phone 515/525/535: Extensions and Accessories

A system telephone requires a power supply unit if a key extension is installed. 
When using PoE, an IP system telephone requires no power supply unit.

Connecting the Key Extension

CAUTION!

Guard against static charges! 

Static charges can damage the Forum 523/524’s electronic 
components. Make sure you discharge yourself and your tools 
before and during any installation work on the Forum 523/
524 and any connected terminals. Use discharging underlays 
or antistatic mats where possible.

Please note:Never

 attach a key extension to a system telephone that is 

already connected to Forum 523/524. Pull the network cable 
out of the socket before screwing the key extension onto it.

IP system telephone with PoE (Power over 
Ethernet)

No

IP system telephone with 1-3 key exten-
sions and PoE

No

Configuration

Needs Power Supply Unit

Summary of Contents for forum 523





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands