manualshive.com logo in svg

Proximus forum 523, Mounting And Commissioning Manual

Share
Download
Proximus forum 523 Mounting And Commissioning Manual Download Page 29

Technical Notes

Update Notes

27

When you enter the upgrade licence authorisation key, the communica-
tions system changes its designation to Forum 524.

The upgrade licence is already included when you purchase a new Forum 524 
communications system.

Technical Notes

The extended release 9 features may require you to upgrade the existing 
communications system. Please note the following points: 

●

A 256 MByte CompactFlash card is the prerequisite for updating to 
release 9. 

●

The system software is divided into 2 parts: a software container with the 
firmware which you load into the communications system when you 
update. And a software container (“firmware extensions” for certain 
terminal types) which you only load after updating the communications 
system. 

●

The firmware extensions contains software for the following terminal 
types: 

●

If you are not operating any of these terminals, you do not have to load the 
firmware extensions. 

●

From release 9 the IP telephones “Forum IPhone 520” und 
“Forum IPhone 530” are no longer supported. During an update, 
configured devices will be converted to “Forum IPhone 525” or 
“Forum IPhone 535” to retain the key data.

●

Data backups < release 7.0 are no longer supported.

Type

Model

SIP system phones

Forum IPhone 512
Forum IPhone 545

DECTover IP base stations

Forum Base DECT IP
Forum Base DECT IP v2

Summary of Contents for forum 523





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands