VoIP System Telephones
Voice over IP (VoIP)
117
1.
The “IP Phone Configurator” can be started directly from the Product CD.
Start Windows Explorer. Navigate to the Product CD. Double-click the
“Forum\IpPhoneConfigurator.jar” file.
The “IP Phone Configurator” dialogue opens. Select the desired language
setting (“English” or “German”)from the drop-down menu.
2.
Enter the network address of the VoIP system telephone. You have two
connection types to choose from under
Connection to IP Phone
:
– Deactivate the
IP Phone address
option to establish a broadcast
connection via “UDP-Broadcast”. You have to select this type of
connection if the VoIP system telephone has not yet been assigned an IP
address. IP broadcasts cannot be transmitted via router. The VoIP system
telephone thus has to be directly connected to your PC via a hub or via a
switch.
– Activate the
IP Phone address
option to establish a point-to-point
connection via “UDP-Unicast”. Enter the IP address of the VoIP system
telephone into the entry field. You can select this type of connection if the
VoIP system telephone has already been assigned an IP address.
3.
Enter the
MAC address
of the VoIP system telephone. You will find the
MAC address on the underside of the device. Click on
List configuration
.
The status bar at the bottom edge of the programme window displays “list
OK”.
4.
Change the desired settings under
Configuration of the IP Phone
. Click on
Reset configuration
to activate the standard settings for all entry fields.
5.
Click on the
Send configuration
command to transfer the currently shown
configuration to the VoIP system telephone. The status bar at the bottom
edge of the programme window displays “send OK”.
Note:
The VoIP system telephone receives the configuration and sends
a response. The new configuration is only saved and activated
once this has happened. This can result in the “IP Phone Config-
urator” not receiving the response of the VoIP system telephone.
Please note:
If you are operating multiple network cards with active IP
configuration in your PC, this may mean that the loading of
configuration data fails. First you deactivate additional network
cards or use a point-to-point connection. Sending configuration
data with a broadcast connection functions even without a
response from the VoIP system telephone.
Summary of Contents for forum 523
Page 1: ...Forum 523 524 Mounting and Commissioning Manual ...
Page 10: ...8 ...
