Configuration
132
U
pn
DECT and DECTover IP
®
3.
Enter the
MAC address
of the DECTover IP base station. The MAC address
will be printed on the label on the DECTover IP base station’s casing. Click
on
List configuration
.
The DECTover IP base station’s current configuration will be displayed.
4.
Change the DECTover IP base station’s IP address configuration. Activate
the
Use local configuration
option (“yes”) and enter the required details:
–
IP address
: Static IP address of the DECTover IP base station
–
Net mask
: Subnet mask of the DECTover IP base station
–
OMM IP address
: IP address of the DECTover IP Manager. For the actual
DECTover IP Manager simply repeat the entry from the
IP address
entry
field.
–
OMM port number;
Leave the default setting on “16321”.
–
PBX IP address
: IP address of the Forum 523/524
–
PBX port
: Leave the default setting on “8099”.
5.
Under
TFTP server address
enter the IP address the operating software is
to be downloaded from. This will usually be the communications system’s
IP address. Leave the
TFTP file name
setting on the default setting (“/
ram/ip_tel/ip_rfp.cnt”) or “ng_ip_rfp.cnt”.
6.
For a remote location, the Forum 523/524’s LAN will usually be accessed
via a (VPN) router. Click on
Router addresses
:
[+]
. Enter the router’s IP
address (“default gateway”). Confirm by clicking on
Add
.
7.
To make sure RFP error messages receive correct time stamps, add an
NTP
server address
with the
Add parameter
button. Then click
NTP server
address
:
[+]
. Enter the IP address of the communications system. Confirm
with
Add
.
8.
Click on
Send config
to activate the desired IP address configuration.
Summary of Contents for forum 523
Page 1: ...Forum 523 524 Mounting and Commissioning Manual ...
Page 10: ...8 ...
