PRIMERGY BX620 S3, User Manual

Page: 67 / 287

67
PRIMERGY BX620 S3 Server Blade User’s Guide
3
O
S
I
n
st
a
llation
U
s
ing ServerS
ta
rt
3
Insert the ServerStart floppy disk containing the created configuration file and
click [OK].
Set the ServerStart floppy disk in the write-enabled state. If it is write protected, installation will
fail.
The [Initializing ServerStart] window appears and the ServerStart initialization process starts.
Depending on the hardware configuration, this process may take a few minutes. When
initialization is completed, the [ServerStart Unattended Mode] window appears.
4
Click [Start].
Installation starts.
1. When RAID has been configured, the system restarts.
2. If a message prompts you to insert the Array Controller Document & Tool CD, insert
the CD-ROM and click [OK].
3. If a message prompts you to insert the ServerView CD-ROM, insert the
PRIMERGY Document & Tool CD and click [OK].
This message does not appear when the PRIMERGY Document & Tool CD has been
inserted already.
4. If a message prompts you to insert the Service Pack CD-ROM, insert the CD-ROM
and click [OK].
This message does not appear when Service Pack is not selected.
5. For Windows Server 2003 x64, a message prompts you to insert the ServerStart
Disc 2 and restart the system. Insert the ServerStart Disc 2 and restart the system.
5
When a message prompts you to insert the OS CD-ROM, insert the CD-ROM
and click [OK].
After files are copied, a message prompts you to insert the ServerStart CD-ROM.