PRIMERGY BX620 S3 User Manual Download Page 201

Page: 201 / 287

201

PRIMERGY BX620 S3 Server Blade User’s Guide

Inst

llin
g I
n

al O

tions

7.7.3 How to Install the Internal Hard Disk Unit

Turn off the server blade.

→

"3.3 Turning off the Server" in "BX600 S2 Blade Server System Unit Hardware Guide"

Touch a metal part of the chassis to discharge static electricity.

Remove the dummy unit from the bay to accommodate an internal hard disk

unit.

A dummy unit is inserted into a bay not occupied by an internal hard disk unit. Pull the dummy

unit out towards you with its tabs being pressed inward.

Be sure to keep the removed dummy units for later use.

Install the internal hard disk unit into the server blade.

1. Insert the internal hard disk unit in the bay while the cover of the internal hard disk

unit is open.

2. Close the cover of the internal hard disk unit securely, and lock the tab.

Tabs

Tab

Cover

Summary of Contents for BX620 S3
































































































































































































































































































Search results

Summary of Contents for BX620 S3

Reviews:

Brands by name

Popular brands

PRIMERGY BX620 S3, User Manual

Search results

Summary of Contents for BX620 S3

Reviews:

Brands by name

Popular brands