PRIMERGY BX620 S3 User Manual Download Page 37

Page: 37 / 287

PRIMERGY BX620 S3 Server Blade User’s Guide

Checkin

before O

Inst

llatio

2.2 Selecting the Installation Method

When installing the OS for the first time, there are multiple installation methods. Refer

to the following to decide on the method.

To set up multiple servers with the same model and configuration, refer to "3.5 Installation on Multiple

(the Second and Subsequent) Servers" (

pg.95).

■

Installation Using ServerStart

When an OS is installed using ServerStart, the driver for the expansion card that is automatically

recognized will be installed automatically. In addition, high reliability tools and array controller

administrative tools are installed automatically. Installation using ServerStart is recommended.

For features of ServerStart, refer to "1.2.1 Setup Support Tool - ServerStart" (

pg.18).

■

Installation While Maintaining the Established RAID Environment

In guided mode or preconfiguration mode, select [Logical Drive View] at [Raid and Disk Configuration

Wizard] (in the [Configuration for Disks and RAID Controllers] window) and install the OS.

■

Installation Using ServerStart While Maintaining the Existing
Partitions

In expert mode, start up Disk Manager, format the installation partition, and install the OS.

Refer to "3.1 Guided Mode" and perform installation.

* If you follow the wizard, setup will be performed

correctly.

Linux

Windows Server 2003 x64
Windows Server 2003 R2

Installation is performed manually.
Refer to "4.2 Starting Manual Installation" and
perform installation.

When setting setup information in advance on
the client computer, refer to "3.2 Preconfiguration
Mode" and perform installation.

What OS will you use?

Will you use ServerStart?

Yes

For the use of Linux, refer to the Fujitsu PRIMERGY
website (http://primergy.fujitsu.com).

Windows Server 2003
Windows 2000 Server

Windows Server 2003 R2 x64

Summary of Contents for BX620 S3
































































































































































































































































































Search results

Summary of Contents for BX620 S3

Reviews:

Brands by name

Popular brands

PRIMERGY BX620 S3, User Manual

Search results

Summary of Contents for BX620 S3

Reviews:

Brands by name

Popular brands