PRIMERGY BX620 S3 User Manual Download Page 62

Page: 62 / 287

Chapter 3 OS Installation Using ServerStart

1. When RAID has been configured, the system restarts.

2. If a message prompts you to insert the Array Controller Document & Tool CD, insert

the CD-ROM and click [OK].

3. If a message prompts you to insert the PRIMERGY Document & Tool CD, insert the

CD and click [OK].

4. If a message prompts you to insert the Service Pack CD-ROM, insert the CD-ROM

and click [OK].

5. For Windows Server 2003 x64, a message prompts you to insert the ServerStart

Disc 2 and restart the system. Insert the ServerStart Disc 2 and restart the system.

When a message prompts you to insert the OS CD-ROM, insert the CD-ROM

and click [OK].

For Windows 2000 / Windows Server 2003 / Windows Server 2003 x64

Insert the OS CD-ROM (Installation CD-ROM).

For Windows Server 2003 R2 / Windows Server 2003 R2 x64

Insert the OS CD-ROM (Installation CD-ROM) Disc 1. If a message prompts you to insert the

Disc 2, eject the Disc 1 and insert the OS CD-ROM (Installation CD-ROM) Disc 2.

After files are copied, a message prompts you to insert the ServerStart CD-ROM.

Insert the ServerStart Disc 1 CD-ROM and click [OK].

The License Agreement window appears.

Click [I agree].

After files are copied, a message prompts you to eject the CD-ROM and floppy disk.

Eject the CD-ROM and floppy disk and click [OK].

Then the system is restarted.

The system continues the installation operation after restart.

OS GUI setup, LAN utility installation, Service Pack installation, and Active Directory

installation are performed automatically.

When a confirmation message to restart appears, click [Restart].

The system restarts and installs high reliability tools.

When a message on installation completion appears, press any key.

Restart the system.

Click [Start]

→

[Shutdown]. Select [Restart] and click [OK].

The system restarts.

When the system restarts, log on to the server using the Administrator account

for the local computer.

The server setup and OS installation have been completed.

Refer to "Chapter 5 Operations after OS Installation" (

pg.125) and perform necessary procedures

before starting server operations.

Summary of Contents for BX620 S3
































































































































































































































































































Search results

Summary of Contents for BX620 S3

Reviews:

Brands by name

Popular brands

PRIMERGY BX620 S3, User Manual

Search results

Summary of Contents for BX620 S3

Reviews:

Brands by name

Popular brands