PRIMERGY BX620 S3 User Manual Download Page 182

Page: 182 / 287

182

Chapter 7 Installing Internal Options

Return the CPU fastener and the socket lever to their original positions.

1. Close the CPU fastener.

2. Close the socket lever to fasten the CPU.

Attach the heat sink.

Remove the grease cover on the back before attaching the heat sink.

Carefully tighten the heat sink screws in a cross pattern.

Attach the top cover.

"7.2 Removing and Attaching the Top Cover" (pg.176)

Install the server blade to the chassis.

→

"4.2 Installing Server Blades" in "BX600 S2 Blade Server System Unit Hardware Guide"

Turn on the server blade and check the BIOS Setup Utility settings.

Start the BIOS Setup Utility and select the [Server] menu

→

the [CPU Status] submenu to check

that [CPUn Status] (n: slot number) is set to [Enabled]. If the CPU is set to [Disabled], change the

setting to [Enabled]. For more details, refer to "8.2.8 Server Menu" (

pg.217).

■

How to Remove a CPU

To remove a CPU, simply reverse the installation procedures.

CPU fastener

Socket lever

Tighten screws

Summary of Contents for BX620 S3
































































































































































































































































































Search results

Summary of Contents for BX620 S3

Reviews:

Brands by name

Popular brands

PRIMERGY BX620 S3, User Manual

Search results

Summary of Contents for BX620 S3

Reviews:

Brands by name

Popular brands