manualshive.com logo in svg

PRIMERGY BX620 S3, User Manual

Share
Download
PRIMERGY BX620 S3 User Manual Download Page 110

110

Chapter 4  Manual OS Installation

7

Follow the instructions from the setup program to continue the installation 

procedures.

If a message indicating that the driver has failed in the Windows logo test for validating the 

compatibility with Windows appears, select [Yes] to continue the installation procedure.

8

Apply Windows Server 2003 Service Pack.

For details, refer to the description in the window. 

Drivers may be replaced with those in the Service Pack during Service Pack application. For              
more details, refer to the manual supplied with the hardware.

9

Install the ChipSet driver.

1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.

When the ServerStart window appears, exit ServerStart.

2. Execute the following command on the CD-ROM.

[CD-ROM drive] :\DRIVERS\ChipSet\Intel\5000P\infinst_autol.exe

The installation wizard starts up.

3. Click [Next]. Follow the instructions in the window to perform installation.

4. When the "InstallShieled(R)

 

wizard has completed" message appears, eject the 

ServerStart CD-ROM from the CD-ROM drive and click [Finish] to restart the 

system.

10

Install the Graphic driver.

1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.

When the ServerStart window appears, exit ServerStart.

2.  Execute the following command on the ServerStart CD-ROM.

[CD-ROM drive]: \DRIVERS\VIDEO\ES1000\setup.exe

The installation wizard starts up.

3. Click [Next]. Follow instructions in the window to perform installation.

When the installation is completed, the completion window appears.

4.  Eject the ServerStart CD-ROM from the CD-ROM drive, click [Finish], and restart 

the system.

11

Install the LAN driver.

Use the ServerStart CD-ROM to install the LAN driver. For more details, refer to "4.3 Installing 

the LAN Driver" (

pg.116).

12

Install the fibre channel driver.

When the Fibre Channel Expansion Board has been installed, use the driver disk created from the 

ServerStart CD-ROM to install the fibre channel driver after Windows Server 2003 installation 

was completed. For more details, refer to "4.4.2 Windows Server 2003" (

pg.123).

13

Install RAID Management Tool.

For details about how to install, refer to "Integrated Mirroring SAS User’s Guide" in the Array 

Controller Document & Tool CD.

Summary of Contents for BX620 S3
































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands