manualshive.com logo in svg

PRIMERGY BX620 S3, User Manual

Share
Download
PRIMERGY BX620 S3 User Manual Download Page 20

20

Chapter 1  Overview

■

Intuitive User Interface 

The intuitive user interface allows you to easily set the necessary information. 

●

Main Window 

When ServerStart is started, the following window appears. The window and tool bar differ depending 

on the mode. 

●

Toolbar

In Guided Mode / Expert Mode 

While the wizard is running, do not click the 

 icons on the tool bar to move to the previous or 

next window or to the upper tree level. To move to a different window, click the [Previous], [Up], or 

[Next] button at the bottom of the wizard window. 

Brings you to 
the next page.

Brings you up
one tier.

Brings you to 
the main screen.

Ends ServerStart.

Changes the size 
of icons.

Brings you to 
the previous page.

Resets the status 
function.

ON/OFF of the tree display is set.
Do not click this because it is not supported.

Summary of Contents for BX620 S3
































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands