PRIMERGY BX620 S3 User Manual Download Page 6

Page: 6 / 287

■

Server Blade Types

Server blade types are described as follows.

Reference Information

■

Software Manuals

Software Manual contains other reference information and cautions for ServerStart not described in this

manual. Please read it before using ServerStart.

Software Manual is contained as a "README.TXT" file in the root directory on the ServerStart CD-

ROM. Use a text editor to read it.

■

Latest Information about Software Provided with This Server

For the latest information regarding ServerStart and other software provided with this server, refer to the

Fujitsu PRIMERGY website (http://primergy.fujitsu.com).

Warning and Caution Labels

Warning and caution labels are found on the server.

Do not remove or stain these labels.

table: Server Types

Type

Expressions and abbreviations

Servers without an internal hard disk

Diskless type

Summary of Contents for BX620 S3
































































































































































































































































































Search results

Summary of Contents for BX620 S3

Reviews:

Brands by name

Popular brands

PRIMERGY BX620 S3, User Manual

Search results

Summary of Contents for BX620 S3

Reviews:

Brands by name

Popular brands