PRIMERGY BX620 S3, User Manual

Page: 240 / 287

240
Chapter 9 Operation and Maintenance
9.1 Daily Maintenance
This section explains how to perform maintenance during operations.
●
PRIMERGY information
The latest PRIMERGY, Update module, driver, and software information is available at the address
below. Use as necessary.
http://primergy.fujitsu.com
9.1.1 Checking the Server Condition
Use the status LED and server monitoring tool to check the server status.
■
Checking Each LED
This server is equipped with LEDs that display various hardware conditions.
Check the server status via each LED after starting the server. For details about the location and function
for each status display LED, refer to "1.3 Component Names and Functions" ( pg.24) and "Chapter 1
Component Names and Functions" in the "BX600 S2 Blade Server System Unit Hardware Guide".
■
Server Monitoring Tool (ServerView)
ServerView is software that monitors whether the server hardware is in a normal state to protect
important server resources. When using ServerView, the server hardware is monitored all the time. Early
detection of errors is made possible because if an error that could cause trouble is detected, the
administrator is notified in real-time.This allows the server administrator to remove system errors early
and avoid trouble.
For an overview of and details about installation of ServerView and other high reliability tools, refer to
"1.2 Supplied Software" ( pg.18) and "Chapter 6 High Reliability Tools" ( pg.165).
■
Check Using Management Blade
The Management Blade is equipped with two management interfaces (Web UI and CLI) that enable you
to monitor whether the server hardware is running properly.
For details about the Management Blade, refer to "BX600 S2 Blade Server System Unit Hardware
Guide".