Installation and Operation Manual
Page 99 of 156
[PVI-XXX.0-YY(-TL) - Rev:1.0]
13.5.
Information
By selecting the INFORMATION menu, the
display will show a submenu as shown in
Figure 13-4.
13.5.1
ID. module
By selecting this item, you will see the Part
Number of the module selected which is
part of the system.
13.5.2
Mod. SeriesNo.
By selecting “Mod.Series N." the following
information will be shown:
•
Series No.
:
Series number of the
selected module.
•
Wk xx Yr xx
: Production week (Wk)
and year (Yr) of the module.
13.5.3
System ID
Selecting this item, you will see 4 figures
indicating the Part Number of the system.
13.5.4
Sys. Series No.
By selecting “Sys. Series No." the following
information will be shown:
•
Series No.
: Series number of the rack.
13.5.5
Trafo type
By selecting “Trafo type”, the following
information will be shown:
•
Trafo yes/no
: Presence
of
the
transformer or not.
•
Mod. No.
.: Number of modules in the
system.
13.5.6
Firmware
By selecting this item, the release of the
software in the module will be shown.
13.5.7
Junction Box (only on the
module designated for control)
This item of the menu allows for verification
of the state of the StringCombs in the
system.
By selecting “Junction Box”, the following
information will be shown:
•
Nn, Tn, Rn
: (Nn) is number n of the
StringCombs set by the installer. (Tn) is
number n of the rack (Rack N.) to
which the StringCombs refers. (Rn) is
number n of the StringCombs detected
by the module. R must coincide with N,
unless there is a fault.
•
Jn, Px
:
(Jn) is the String
Comb with
Field number n. Number n varies from
1 to 12. (Px) indicates the presence Y/N
of the PVI-
STRINGCOMB. There can be
a maximum of 12.
