Installation and Operation Manual
Page 15 of 156
[PVI-XXX.0-YY(-TL) - Rev:1.0]
2.
IMPORTANT SAFETY INFORMATION
NOTICE
The installation of the PVI-XXX.0(-TL) must
be performed in compliance with national
and local regulations.
We strongly recommend to read all
instructions in this Manual and notice the
symbols of the single paragraphs before
installing or using the product.
NOTICE
For each type of maintenance or repair (non
covered in this manual), please contact the
dealer. Prohibited changes may damage the
device and things in general, causing the
loss of product warranty.
NOTICE
Electrical connections must always be made
correctly and with the correct polarity in
order to avoid possible damage to the
device and the photovoltaic panels.
WARNING
The connection to the distribution grid
should be made only after receiving
approval from the Body responsible for
electricity distribution, as required by
national regulations in force and can be
done exclusively by a qualified personnel.
WARNING
In case of failure, an electric arc may have
been produced within the PVI-XXX.0(-TL),
supported by the DC source. At worst, this
may even damage carpentry, with possible
presence of smoke, and thus being a danger
to persons and property.
Carefully follow all instructions in this
Manual, paying particular attention to the
chapter about installation.
Chapter §10
We recommend using
appropriate tools
