Installation and Operation Manual
Page 75 of 156
[PVI-XXX.0-YY(-TL) - Rev:1.0]
11.2.
Connection of the DC cables from the photovoltaic field
After having carefully read and understood
the premises of the preceding paragraphs,
the cables from the photovoltaic field can be
connected.
Chapter §6
Since the Master/Slave or Multi-
Master configuration is already
carried out before delivery of the
inverter, only the DC cables have to
be connected.
Follow the directions in the points and of
the following figures:
Locate the DC cables from the
photovoltaic field.
Connect the cables in the input
terminal block (Figure 11-1 or Figure
11-2) respecting the correct polarities.
Chapter §5.2.1
Figure 11-1: DC cable connection (versions with power ≥275kW or without Transformer)
+
-
