Installation and Operation Manual
Page 57 of 156
[PVI-XXX.0-YY(-TL) - Rev:1.0]
9.2.2
Removal of the inverter from the wooden crate
NOTICE
The packaging of the PVI-XXX.0(-TL) is done as in Figure 9-1. To withdraw the inverter it is
necessary to remove the lid first, and then the side panel corresponding to the rear side of
the inverter, which can be identified by the wording “
fork up from this side
”.
Here are some examples of packaging:
Figure 9-1: Transport crate
