Installation and Operation Manual
Page 93 of 156
[PVI-XXX.0-YY(-TL) - Rev:1.0]
13.2.
Password entry
If a password is requested, carry out the
following procedure:
The default password is 0000. It can
be modified from the settings menu
Figure 13-3.
Using the display keys, you can enter the
numbers:
•
Pressing
ENTER
you scroll from one
number to another (from left to right).
•
Pressing
ESC
you return to the
preceding number (from right to left).
•
By pressing ESC several times you will
return to the previous menus.
•
DOWN
scrolls downwards through the
numbers (from 9 to 0)
•
UP
scrolls upwards through the
numbers (from 0 to 9)
After typing the correct password, press
ENTER
, accessing the various information
items saved in the protected section.
13.3.
The display LED
The display is provided with several
signalling LEDS:
POWER ON:
[GREEN LED] Indicates the
presence of energy and of connection /
disconnection from the grid.
ALARM:
[RED LED] Indicates a problem.
GFI:
[RED LED] Not used at present.
MISSING GRID:
[RED LED] If on, it indicates
lack of voltage of a grid or an anomaly of the
grid. The lighting may be due to the open
grid switch (in this signalled on the display).
MASTER:
[RED LED] Indicates whether the
module is Master (on) or Slave (off).
