Installation and Operation Manual
Page 55 of 156
[PVI-XXX.0-YY(-TL) - Rev:1.0]
9.
STORAGE AND HANDLING
9.1.
Preliminary checks
The dealer has safely delivered your
AURORA to the forwarding agent, and in
perfect condition. The forwarding agent, by
accepting
the
package,
assumes
responsibility until delivery. In spite of the
care taken by the forwarding agent, the
packaging and its contents may be damaged
during transport. Handling and storage of
the device before installation require
particular care. It is therefore necessary to
follow the indications below.
NOTICE
Transport and storage temperatures must
be observed.
Chapter §21
NOTICE
Since there are electronic circuits inside the
cabinet and electrical connectors, particular
care must be taken to avoid falls or blows
which could later endanger the correct
functioning of the inverter and compromise
the safety of persons during installation
and/or operation.
NOTICE
It is important, before installation, to check
that the device is intact. Any anomalies in
packaging and/or the presence of freely
moving objects which do not regard the
accessories provided must be taken as an
alarm bell. In such cases, contact the dealer.
In conclusion, the customer is invited to
carry out the following checks:
•
Examine the shipping container for signs of
visible damage: holes, cracks and any other
sign of possible damage inside.
•
Describe in writing any damage or lack of
documents
received;
this
must
be
undersigned by the carrier, with his full
name.
•
Open the shipping container and examine
the contents for signs of any damage inside.
When unpacking be careful not to discard
equipment, components or manuals. If any
damage is found, contact the forwarding
agent to determine the best measures to
take. An inspection may be required;
Keep al the packaging material for the
inspector!
