Power One Aurora PVI-110.0-YY, User, Installation And Maintenance Manual

Page: 100 / 156

Installation and Operation Manual
Page 100 of 156
[PVI-XXX.0-YY(-TL) - Rev:1.0]
13.5.7.1 States
This item of the menu allows for verification
of the state of all the parameters of the
StringCombs selected previously. These can
be OK or NOT OK:
•
Fuses : State of fuses.
•
Temp : Temperature of the box.
•
Volt : Voltage of the field.
•
Balance : Unbalanced string currents.
•
Current : String current.
•
Power : StringComb supply.
•
Comm .: Communication.
•
Cal : Current calibration.
13.5.7.2 Fuses
This item of the menu allows for verification
of the state of the single fuses of the
StringComb selected previously. These can
be OK or NOT OK:
•
F1 : State of fuse F1.
•
….
•
F20 : State of fuse F20.
13.5.7.3 Currents
This item of the menu allows for verification
of the state of the currents of the
StringComb selected previously. These can
be OK or NOT OK:
•
I1
: State of current l1.
•
….
•
I20 : State of current l20.
13.6. Statistics
By selecting the STATISTICS menu, the
display will show a submenu as indicated in
Figure 13-5.
13.6.1 Timing
By selecting “Timing”, the following
information will be shown:
•
Life : Total operating time.
•
Grid : Hours of connection to the grid.
13.6.2 N. Conn (Number of
Connections)
By selecting “N. Conn”, the number of
connections with the grid will be shown.
13.6.3 E-Tot
By selecting “E-Tot”, the following
information will be shown:
•
E : Total energy produced.
•
Val .: Economic gain.