Delete all devices (140)
The wireless connections to all units is cancelled here.
9.2.4 Time programs
General information about the time programs.
Note
Time programs 1 and 2 are always assigned to the respective
heating circuits (1 - 3) and only displayed if these heating circuits
are present and also turned on in the menu Configuration (prog.-
no. 5710 and 5715).
Time program 3 can be used for heating circuit 3, for the DHW and for the
circulation pump, depending on the setting, and is always displayed.
Time program 4 can be used for the DHW and for the circulation pump,
depending on the setting, and is always displayed.
Time program 5 is not assigned a function and can be freely used for any
application using an output QX.
Select (500 – 600)
Selection of weekday or day blocks. The day blocks (Mon-Sun, Mon-Fri
and Sat-Sun) assist the adjustment. The set times are only copied to the
individual weekdays and can be changed in the individual day settings as
required.
The times of the individual weekdays always determine the heating pro
gram.
Note
If a time in a group of days is changed, all 3 start/stop phases will
be copied to the day group automatically.
To call up groups of days (Mon-Sun, Mon-Fri or Sat-Sun), turn the
control knob anti-clockwise; to call up individual days (Mon, Tue,
Wed, Thu, Fri, Sat, Sun), turn the control knob clockwise.
Heating phases (501 — 606)
Up to 3 heating phases can be set per heating circuit. These are active on
the days selected under Select (prog.no. 500, 520, 540, 560, 600). During
the heating phases the system heats to the set comfort setpoint. Outside
the heating phases, the system heats to the reduced setpoint.
Note
The time programs are only activated in Automatically operating
mode.
Copy? (515–615)
The time switching program for one day can be copied and assigned to
another or several other days.
Note
Day blocks cannot be copied.
Default values (516-616)
Setting of the default values given in the setting table
9.2.5 Holiday programs
Select (641 - 661)
Note
The heating circuits may be set to a selectable operation level with
the holiday programme during a certain holiday period.
8 holiday periods can be selected with this preselection.
9 Settings
7636047 - 02 - 24082015
85
Summary of Contents for eurocondense four 125 kw
