Potterton eurocondense four 125 kw, Installation, Operation And Maintanance Manual, Page: 128 / 148

End user (Eu) Commissioning, Engineer (menu
Status)
Partial charging active
Recooling active Recooling via collector
Recooling via HW/CHs
Charged Charged, max st tank temp
Charged, max charging temp
Charged, forced temp
Charged, required temp
Part charged, required temp
Charged, min charging temp
Cold Cold
No request No request
Tab.22 Status table swimming pool
The following messages are possible under Swimming pool:
End user (Eu) Commissioning, Engineer (menu
Status)
Manual control active Manual control active
Fault Fault
Heating mode restricted Heating mode source
Heated, max swi pool temp Heated, max swi pool temp
Heated Heated, setpoint solar
Heated, setpoint source
Heating mode Heating mode solar off
Heating mode source off
Cold Cold
9.2.24 Diagnostics cascade/heat generation/consumers
Diagnostics cascade/heat generation/consumers (8100-9058)
Displays of different setpoint and actual values, relay switching statuses
and counter statuses for diagnosis purposes.
9.2.25 Burner control
Prepurge time (9500)
Pre-venting time.
Caution
This parameter must only be changed by a heating specialist!
Required output prepurging (9504)
Nominal output fan speed during preventing.
Required output ignition (9512)
Nominal output fan speed during ignition.
Required output LF (9524)
Nominal output fan speed under boiler in part load.
9 Settings
128 7636047 - 02 - 24082015