ID-E342-001GB
39
-
printer paper out feed using the PAPER push button;
-
printer test: press PAPER and RESET buttons simultaneously; next, release the RESET button;
next, after 1 second, release the PAPER button;
-
printer controller restart after pressing the RESET push button.
In order to replace a paper roll:
-
use lever 1 to open the printer mechanism;
-
replace the used roll with a new one on the holder;
-
insert the paper into the printer mechanism guide slit so that the thermo-sensitive surface is
visible while inserting it into the printing mechanism guide slit;
-
use lever 1 to close the printer mechanism;
-
press PAPER to pull the paper into the mechanism.
Fig. 5.10 DR-48 printer view from control panel inside
5.8 POWER SUPPLY MODULE
The POLON 4500 control panel's design makes it possible to supply it from two power sources:
-
AC 230 V/50 Hz - basic power source;
-
DC 24 V – reserve power source (battery cluster).
The AC power adaptor (nominal voltage 30 V/10 A) is equipped with a circuit breaker and fuse. It is
designed as a separate module located in the right lower corner of the control panel. The adaptor
supplies all control panel modules and facilitates operation with the battery cluster by means of the MZ-
48 power supply module.
In the case of 230 V/50 Hz mains power failure, the control panel is automatically switched to power
supply provided by the battery cluster and the device operation remains uninterrupted. When the mains
Summary of Contents for 4000
Page 25: ...ID E342 001GB 25 Fig 5 3 MSL 1M line module overview ...
Page 96: ...96 ID E316 001GB Fig 9 16 Non potential output exemplary connection ...
Page 101: ...ID E342 001GB 101 Fig 10 2 MSI 48 and MSI 48 Ed 3 network modules ...
Page 103: ...ID E342 001GB 103 Fig 10 3 Four control panels network connection with two pairs of cables ...
