Planmeca Compact i Classic v2 User Manual Download Page 42

Page: 42 / 190

The tray mounting arm is attached to the instrument console with a quick-

connector. To remove the tray assembly from the instrument console, pull

the ring of the locking mechanism outwards (1) and then pull the tray arm

away from its position (2).

The mounting arm can be attached to the instrument console by pushing it to

its position.

10.5.2 Integrated tray table

The integrated tray table is available for OP-deliveries with hanging-tube

instruments. The maximum load on the tray table is 2 kilograms (4.4 lbs).

10 Instrument system

34 Planmeca Compact i

User's manual

Summary of Contents for Compact i Classic v2































































































































































































Search results

Summary of Contents for Compact i Classic v2

Reviews:

Related manuals for Compact i Classic v2

Brands by name

Popular brands

Planmeca Compact i Classic v2, User Manual

Search results

Summary of Contents for Compact i Classic v2

Reviews:

Related manuals for Compact i Classic v2

Brands by name

Popular brands