Planmeca Compact i Classic v2, User Manual

Page: 101 / 190

The intraoral scanner is placed in the Flexy-holder.
CAUTION
Make sure that you attach the intraoral scanner connector the right way into
the USB 3.0 port for the scanner on the cuspidor. If the connector is turned
the wrong way, it will not go into the port. Use of unnecessary force will
break the connector.
NOTE
There are three USB ports on the cuspidor. Make sure you attach the
connector to the right port, see section "Cuspidor" on page 23.
NOTE
To avoid splashes on the scanner, remove it from the dental unit after use
and place it on the table stand.
For more information, see
Planmeca FIT user’s manual.
20.8.1 Operating intraoral scanner from foot control
To be able to operate the Planmeca intraoral scanner from the foot control,
the feature must be enabled by a Planmeca service technician.
Activating instrument view
The foot control can be configured so that the Planmeca intraoral scanner is
activated when you first pick up the scanner from the Flexy-holder and then
push the left-side or the right-side knob up. Contact your Planmeca dealer.
The scanner can be deactivated by pushing the knob up once more.
Generating model
Push the left-side knob down to generate a model of the scanned area.
20 Operating instruments
User's manual Planmeca Compact i 93