Planmeca Compact i Classic v2 User Manual Download Page 110

Page: 110 / 190

3. Adjust the duration of the bowl rinsing.

The letter ‘b’ on the control panel indicates that the duration of the bowl

rinsing is adjusted.
If the letter 'c' is displayed, it means that the duration of the cup fill is

adjusted. To change the function to be adjusted, press Cup fill / bowl

rinse.
The minimum value is 5 seconds and the maximum 240 seconds, and it

is adjusted in steps of 5.

4. Press Program.

22.4.3 Duration of cup filling

About this task

NOTE

By default, the cup fill is not activated unless the cup is positioned in its

place under the cup fill tube. To change this setting, contact your Planmeca

dealer.

NOTE

The water in the dental unit is intended for rinsing only, not for drinking.

Steps

1. Press Program.

2. Press Cup fill / bowl rinse.

3. Adjust the duration of the cup filling.

The letter ‘c’ on the control panel indicates that the duration of the cup

filling is adjusted.
If the letter 'b' is displayed, it means that the duration of the bowl rinse is

adjusted. To change the function to be adjusted, press Cup fill / bowl

rinse.
The minimum value is 2 seconds and the maximum is 10 seconds. The

duration is adjusted in steps of 0.5 seconds.

4. Press Program.

22 Programming

102 Planmeca Compact i

User's manual

Summary of Contents for Compact i Classic v2































































































































































































Search results

Summary of Contents for Compact i Classic v2

Reviews:

Related manuals for Compact i Classic v2

Brands by name

Popular brands

Planmeca Compact i Classic v2, User Manual

Search results

Summary of Contents for Compact i Classic v2

Reviews:

Related manuals for Compact i Classic v2

Brands by name

Popular brands