Planmeca Compact i Classic v2 User Manual Download Page 32

Page: 32 / 190

To avoid stagnant water inside the dental unit, regularly use enough water

with external devices connected to the water quick-connector, as the quick-

connector's waterline is not included in the dental unit's flushing and cleaning

programs.

8.9 Planmeca ProX X-ray unit

The Planmeca ProX X-ray unit can be mounted to the dental unit pylon.

CAUTION

Drive the chair carefully when positioning the ProX X-ray unit.

CAUTION

Do not drive the chair during the exposure.

CAUTION

Do not touch the external PC and the patient at the same time.

CAUTION

Move the ProX X-ray unit behind the pylon when it is not being used.

For more information about Planmeca ProX, see Planmeca ProX User’s

Manual.

8.10 Planmeca intraoral scanner

The intraoral scanner can be placed in the Flexy-holder.

8 Planmeca Compact i dental unit

24 Planmeca Compact i

User's manual

Summary of Contents for Compact i Classic v2































































































































































































Search results

Summary of Contents for Compact i Classic v2

Reviews:

Related manuals for Compact i Classic v2

Brands by name

Popular brands

Planmeca Compact i Classic v2, User Manual

Search results

Summary of Contents for Compact i Classic v2

Reviews:

Related manuals for Compact i Classic v2

Brands by name

Popular brands