Planmeca Compact i Classic v2 User Manual Download Page 17

Page: 17 / 190

7 For your safety

7.1 Safety precautions

WARNING

No modification of this dental unit is allowed.

WARNING

Only instruments or equipment approved by Planmeca may be connected to

this dental unit.

WARNING

Do not simultaneously touch the patient and the PC.

WARNING

Do not simultaneously touch the patient and the USB ports, or any electrical

connectors of external instrument modules.

WARNING

Do not touch the patient when opening the cuspidor door or when the

cuspidor door is open.

WARNING

Maintenance procedures shall not be performed while equipment is in use

with a patient.

WARNING

The patient must not be in contact with instruments when the patient is

resuscitated with a defibrillator.

CAUTION

A faulty or broken dental unit must not be used.

CAUTION

Do not perform other maintenance procedures than those instructed in this

manual.

CAUTION

When servicing the unit, always switch the unit off.

CAUTION

Guide the patient to sit on the chair. Make sure no one sits on the legrest,

the backrest or any other part of the dental unit.

7 For your safety

User's manual

Planmeca Compact i 9

Summary of Contents for Compact i Classic v2































































































































































































Search results

Summary of Contents for Compact i Classic v2

Reviews:

Related manuals for Compact i Classic v2

Brands by name

Popular brands

Planmeca Compact i Classic v2, User Manual

Search results

Summary of Contents for Compact i Classic v2

Reviews:

Related manuals for Compact i Classic v2

Brands by name

Popular brands