Planmeca Compact i Classic v2, User Manual

Page: 96 / 190

Independent mode
The Planmeca Lumion Plus polymerisation light can also be operated in the
independent mode. The independent mode is typically used when the
Planmeca Lumion Plus polymerisation light is attached to the assistant
element, but the independent mode can also be configured to be used on
the dentist side (the configuration is performed by a Planmeca service
technician).
The independent mode is indicated by the text
d.LEd on the control panel.
When the Planmeca Lumion Plus polymerisation light is in the independent
mode, it can only be controlled by the buttons on the instrument itself, not
over the control panel or the foot control.
To start the polymerisation cycle in the independent mode, first select the
desired curing mode by pressing the navigation button on the handpiece.
Then, briefly press the start button on the handpiece to start a 10-second
exposure, or press and hold the start button for 2 seconds to start a 20-
second exposure. The polymerisation cycle can be interrupted by pressing
the start button.
In the 10-second cycle, a signal tone is heard at the beginning and the end
of the cycle. In the 20-second cycle, a signal tone is heard as the cycle
starts, after 2 seconds to confirm the start of the 20-second cycle, after 10
seconds and at the end of the cycle.
NOTE
When the Planmeca Lumion Plus polymerisation light is in the independent
mode, it can not be controlled over the foot control.
Refer to the Planmeca Lumion Plus manual of use and maintenance.
20.7 Intraoral camera and Planmeca Romexis
For detailed information on the Somia intraoral camera, please refer to
Planmeca Somia user's manual.
Handpiece
1. Image control button
2. Power/macro button
3. Indicator light
4. Camera lens
5. Light source (LED)
6. USB cable
20 Operating instruments
88 Planmeca Compact i User's manual