Planet GS-4210-16P2S User Manual Download

Page: 290 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

290

4.9.8 AAA

Authentication, authorization, and accounting (AAA)

provides a framework for configuring access control on the Managed

Switch. The three security functions can be summarized as follows:

•

Authentication

— Identifies users that request access to the network.

•

Authorization

— Determines if users can access specific services.

•

Accounting

— Provides reports, auditing, and billing for services that users have accessed on the network.

The AAA functions require the use of configured RADIUS or servers in the network. The security servers can be

defined as sequential groups that are then applied as a method for controlling user access to specified services. For example,

when the switch attempts to authenticate a user, a request is sent to the first server in the defined group, if there is no response

the second server will be tried, and so on. If at any point a pass or fail is returned, the process stops.

The Managed Switch supports the following AAA features:

•

Accounting for

IEEE 802.1X authenticated users

that access the network through the Managed Switch.

•

Accounting for users that access

management interfaces

on the Managed Switch through the console and Telnet.

•

Accounting for

commands

that users enter at specific CLI privilege levels. Authorization of users that access

management interfaces on the Managed Switch through the console and Telnet.

To configure AAA on the Managed Switch, you need to follow this general process:

Configure RADIUS and server access parameters. See

“

Configuring Local/Remote Logon

Authentication

”.

Define RADIUS and server groups to support the accounting and authorization of services.

Define a method name for each service to which you want to apply accounting or authorization and specify the

RADIUS or server groups to use. Apply the method names to port or line interfaces.

This guide assumes that RADIUS and servers have already been configured to

support AAA. The configuration of RADIUS and server software is beyond the

scope of this guide and refers to the documentation provided with the RADIUS or

server software.

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands