Planet GS-4210-16P2S User Manual Download

Page: 237 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

237

4.8.6 Voice VLAN

4.8.6.1 Introduction to Voice VLAN

Configure the switch port rate limit for the switch port on this page.

Voice VLAN is specially configured for the user voice data traffic. By setting a Voice VLAN and adding the ports of the connected

voice equipments to Voice VLAN, the user will be able to configure QoS (Quality of service) service for voice data, and improve

voice data traffic transmission priority to ensure the calling quality.

The switch can judge if the data traffic is the voice data traffic from specified equipment according to the source MAC address

field of the data packet entering the port. The packet with the source MAC address complying with the system defined voice

equipment

OUI (Organizationally Unique Identifier)

will be considered the voice data traffic and transmitted to the Voice

VLAN.

The configuration is based on MAC address, acquiring a mechanism in which every voice equipment transmitting information

through the network has got its unique MAC address. VLAN will trace the address belongs to specified MAC. By This means,

VLAN allows the voice equipment always belong to Voice VLAN when relocated physically. The greatest advantage of the VLAN

is the equipment can be automatically placed into Voice VLAN according to its voice traffic which will be transmitted at specified

priority. Meanwhile, when voice equipment is physically relocated, it still belongs to the Voice VLAN without any further

configuration modification, which is because it is based on voice equipment other than switch port.

The Voice VLAN feature enables the voice traffic to forward on the Voice VLAN, and then the

switch can be classified and scheduled to network traffic.

It is recommended there are two

VLANs on a port

-- one for voice, one for data.

Before connecting the IP device to the switch,

the IP phone should configure the voice VLAN

ID correctly

. It should be configured through its own GUI.

4.8.6.2 Properties

The Voice VLAN feature enables voice traffic to forward on the Voice VLAN, and then the switch can be classified and

scheduled to network traffic. It is recommended that there are two VLANs on a port -- one for voice, one for data.

Before connecting the IP device to the switch, the IP phone should configure the voice VLAN ID correctly. It should be

configured through its own GUI. This page provides to select the ingress bandwidth preamble. The Ingress Bandwidth Control

Setting/Status screens in

Figure 4-8-40

and

Figure 4-8-41

appears.

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands