Planet GS-4210-16P2S User Manual Download

Page: 94 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

Figure 4-3-6:

RMON Counters Page Screenshot

Object

Description

•

etherStatsDropEvents

The total number of events in which packets were dropped due to lack of

resources.

•

etherStatsOctets

The total number of octets received and transmitted on the interface,

including framing characters.

•

etherStatsPkts

The total number of packets received and transmitted on the interface.

•

etherStatsBroadcastPkts

The total number of good frames received that were directed to the

broadcast address. Note that this does not include multicast packets.

•

etherStatsMulticastPkts

The total number of good frames received that were directed to this

multicast address.

•

etherStatsCRCAlignErrors

The number of CRC/alignment errors (FCS or alignment errors).

•

etherStatsUnderSizePkts

The total number of frames received that were less than 64 octets

long(excluding framing bits, but including FCS octets) and were otherwise

well formed.

•

etherStatsOverSizePkts

The total number of frames received that were longer than 1518

octets(excluding framing bits, but including FCS octets) and were otherwise

well formed.

•

etherStatsFragments

The total number of frames received that were less than 64 octets in length

(excluding framing bits, but including FCS octets) and had either an FCS or

alignment error.

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands