Planet GS-4210-16P2S User Manual Download

Page: 69 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

4.2.6.4 Logging Message

The switch log view is provided here. The Log View screens in

Figure 4-2-18

Figure 4-2-19

and

Figure 4-2-20

appear.

Figure 4-2-18:

Log Information Select Page Screenshot

The page includes the following fields:

Object

Description

•

Target

The target of the log view entry. The following target types are supported:



Buffered

: Target the buffered of the log view.



Flash

: Target the Flash of the log view.

•

Severity

The severity of the log view entry. The following severity types are supported:



Emerg

: Emergency level of the system unsable for log view.



Alert

: Alert level of the immediate action needed for log view.



Crit

: Critical level of the critical conditions for log view.



Error

: Error level of the error conditions for log view.



Warning

: Warning level of the warning conditions for log view.



Notice

: Notice level of the normal but significant conditions for log view.



Info

: Informational level of the informational messages for log view.



Debug

: Debug level of the debugging messages for log view.

•

Category

The category of the log view that includes:

AAA, ACL, CABLE_DIAG, CDP, DAI, DHCP_SNOOPING, Dot1X, GVRP,

IGMP_SNOOPING, IPSG, L2, LLDP, Mirror, MLD_SNOOPING, Platform,

PM, Port, PORT_SECURITY, QoS, Rate, SNMP,STP,RMA,

Security-suite,Ststem, Trunk

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands