Planet GS-4210-16P2S User Manual Download

Page: 366 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

366

4.13.5 Trace Router

Traceroute function is for testing the gateways through which the data packets travel from the source device to the destination

device, so to check the network accessibility and locate the network failure.

Execution procedure of the Traceroute function consists of: first a data packet with TTL at 1 is sent to the destination address, if

the first hop returns an ICMP error message to inform this packet can not be sent (due to TTL timeout), a data packet with TTL at

2 will be sent. Also the send hop may be a TTL timeout return, but the procedure will carries on till the data packet is sent to its

destination. These procedures is for recording every source address which returned ICMP TTL timeout message, so to describe

a path the IP data packets traveled to reach the destination. The Trace Route Setting screen in

Figure 4-13-6

appears.

Figure 4-13-6:

Trace Route Setting Page Screenshot

The page includes the following fields:

Object

Description

•

IP Address

The destination IP Address

•

Max Hop

The maximum gateway number allowed by traceroute function

•

Trace Route Results

Display the current trace route result

Button

: Click to strat trace route process.

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands