Planet GS-4210-16P2S User Manual Download

Page: 272 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

272

4.9.4 Dynamic ARP Inspection

Dynamic ARP Inspection (DAI)

is a secure feature. Several types of attacks can be launched against a host or devices

connected to Layer 2 networks by "poisoning" the ARP caches. This feature is used to block such attacks. Only valid ARP

requests and responses can go through DUT. This page provides ARP Inspection related configuration.

A Dynamic ARP prevents the untrusted ARP packets based on the DHCP Snooping Database.

4.9.4.1 Global Setting

DAI Setting and Information screens in

Figure 4-9-29

and

Figure 4-9-30

appear.

Figure 4-9-29:

DAI Setting Page Screenshot

The page includes the following fields:

Object

Description

•

DAI

Enable or disable the Dynamic ARP Inspection.

Button

: Click to apply changes.

Figure 4-9-30:

DAI Information Page Screenshot

The page includes the following fields:

Object

Description

•

Dynamic ARP Inspection

Display the current Dynamic ARP Inspection status.

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands