Planet GS-4210-16P2S User Manual Download

Page: 127 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

127

Button

: Click to apply changes.

Figure 4-5-4:

VLAN Table Page Screenshot

The page includes the following fields:

Object

Description

•

VLAN ID

Display the current VLAN ID entry.

•

VLAN Name

Display the current VLAN ID name.

•

VLAN Type

Display the current VLAN ID type.

•

Modify

Click

to modify VLAN configuraiton.

4.5.5 Interface Settings

This Page is used for configuring the Managed Switch port VLAN. The VLAN per Port Configuration Page contains fields for

managing ports that are part of a VLAN. The port

default VLAN ID

(

PVID

) is configured on the VLAN Port Configuration Page.

All untagged packets arriving to the device are tagged by the ports PVID.

Understand nomenclature of the Switch

■

IEEE 802.1Q Tagged and Untagged

Every port on an 802.1Q compliant switch can be configured as tagged or untagged.

•

Tagged:

Ports with tagging enabled will put the VID number, priority and other VLAN information into the

header of all packets that flow into those ports. If a packet has previously been tagged, the port

will not alter the packet, thus keeping the VLAN information intact. The VLAN information in the

tag can then be used by other 802.1Q compliant devices on the network to make

packet-forwarding decisions.

•

Untagged:

Ports with untagging enabled will strip the 802.1Q tag from all packets that flow into those

ports. If the packet doesn't have an 802.1Q VLAN tag, the port will not alter the packet. Thus,

all packets received by and forwarded by an untagging port will have no 802.1Q VLAN

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands