manualshive.com logo in svg

Planet GS-4210-16P2S, User Manual

The user manual for Planet GS-4210-16P2S is available for free download at manualshive.com. This comprehensive manual provides step-by-step instructions for setting up and optimizing your GS-4210-16P2S switch. Explore all the features and ensure efficient network management with this user-friendly manual. Get your copy now!

Share
Download
background image

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S 

 

 

2 

 

Trademarks

 

Copyright © PLANET Technology Corp. 2017. 

Contents are subject to revision without prior notice.   

PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. 

Disclaimer 

PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no 
warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for 
a particular purpose. PLANET has made every effort to ensure that this User's Manual is accurate; PLANET disclaims liability 
for any inaccuracies or omissions that may have occurred. 
 
Information in this User's Manual is subject to change without notice and does not represent a commitment on the part of 
PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User's Manual. PLANET makes 
no commitment to update or keep current the information in this User's Manual, and reserves the right to make improvements to 
this User's Manual and/or to the products described in this User's Manual, at any time without notice. 
 
If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your comments and 
suggestions. 

FCC Warning 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated 
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the Instruction manual, may cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the 
interference at his own expense.   

CE Mark Warning 

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be 
required to take adequate measures. 

 

Energy Saving Note of the Device 

This power required device does not support Standby mode operation. For energy saving, please remove the power cable to 
disconnect the device from the power circuit. In view of saving the energy and reducing the unnecessary power consumption, it 
is strongly suggested to remove the power connection for the device if this device is not intended to be active.

 

WEEE Warning 

To avoid the potential effects on the environment and human health as a result of the presence of hazardous 
substances in electrical and electronic equipment, end users of electrical and electronic equipment should 
understand  the  meaning  of  the  crossed-out  wheeled  bin  symbol.  Do  not  dispose  of  WEEE  as  unsorted 
municipal waste and have to collect such WEEE separately. 
 

Revision 

PLANET 16/24-Port 10/100/1000T + 2/4-Port 100/1000X SFP Managed Switch User's Manual 

FOR MODELS: GS-4210-16T2Sv2/GS-4210-24T2Sv2/GS-4210-16P2S/GS-4210-24P2Sv2/GS-4210-48T4Sv2   

REVISION: 2.0 (February 2017) 

Part No: EM-GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S_v2.0   

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GS-4210-16P2S

Parker H Series Installation & Service Instructions Manual preview
H Series
Brand: Parker Pages: 344
H3C RA100 Installation Manual preview
RA100
Brand: H3C Pages: 34
3Com 3C410012A - OfficeConnect Remote 531 Access... Getting Started Manual preview
3C410012A - OfficeConnect Remote 531 Access...
Brand: 3Com Pages: 72
LaCie 5BIG NAS PRO Quick Install Manual preview
5BIG NAS PRO
Brand: LaCie Pages: 22
NEC P401-TMX4D User Manual preview
P401-TMX4D
Brand: NEC Pages: 2
Eaton APS6-400 Series Installation And Operation Manual preview
APS6-400 Series
Brand: Eaton Pages: 114
Paradyne Hotwire 6341 Installation Instructions Manual preview
Hotwire 6341
Brand: Paradyne Pages: 23
Draytek Vigor 2760 Series Quick Start Manual preview
Vigor 2760 Series
Brand: Draytek Pages: 54
IBM CFFh Installation Manual preview
CFFh
Brand: IBM Pages: 34
Idis DR-6316PS-S Quick Manual preview
DR-6316PS-S
Brand: Idis Pages: 16
Ubiquiti EdgeSwtch 5XP Quick Start Manual preview
EdgeSwtch 5XP
Brand: Ubiquiti Pages: 13
TP-Link VIGI NVR1004H-4P Quick Installation Manual preview
VIGI NVR1004H-4P
Brand: TP-Link Pages: 2
Ubiquiti EdgeRouter ER-8 Quick Start Manual preview
EdgeRouter ER-8
Brand: Ubiquiti Pages: 20
3Com Fast EtherLink XL PCI 10/100BASE-TXNetwork Interface... Quick Manual preview
Fast EtherLink XL PCI 10/100BASE-TXNetwork Interface...
Brand: 3Com Pages: 12
FiberHome AN5506-04-B User Manual preview
AN5506-04-B
Brand: FiberHome Pages: 44
Microchip Technology PD-9501-10GCO/AC User'S Installation Manual preview
PD-9501-10GCO/AC
Brand: Microchip Technology Pages: 41
TP-Link VIGI Quick Start Manual preview
VIGI
Brand: TP-Link Pages: 2
Porter-Cable 690LR Instruction Manual preview
690LR
Brand: Porter-Cable Pages: 6

Brands by name

Popular brands

Load more brands