Planet GS-4210-16P2S User Manual Download

Page: 268 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

268

Button

: Click to apply changes.

Figure 4-9-24:

Option82 Global Setting Page Screenshot

The page includes the following fields:

Object

Description

•

Option82 Remote ID

Display the current option82 remite ID.

4.9.3.8 Option82 Port Setting

This function is used to set the retransmitting policy of the system for the received DHCP request message which contains

option82. The

drop

mode means that if the message has option82, then the system will drop it without processing;

keep

mode

means that the system will keep the original option82 segment in the message, and forward it to the server to process;

replace

mode means that the system will replace the option 82 segment in the existing message with its own option 82, and forward the

message to the server to process. Option82 Port Setting screens in

Figure 4-9-25

and

Figure 4-9-26

appear.

Figure 4-9-25:

Option82 Port Setting Page Screenshot

The page includes the following fields:

Object

Description

•

Port

Select port for this drop down list.

•

Enable

Enable or disable option82 function on port, default mode is Disable.

•

Allow UnTrusted

Select modes for this drop down list. The following modes are available:



Keep (Default mode)



Drop



Replace

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands