Planet GS-4210-16P2S User Manual Download

Page: 46 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

4. WEB CONFIGURATION

This section introduces the configuration and functions of the Web-based management.

About Web-based Management

The Managed Switch offers management features that allow users to manage the Managed Switch from anywhere on the

network through a standard browser such as Microsoft Internet Explorer.

The Web-based Management supports Internet Explorer 8.0. It is based on Java Applets with an aim to reduce network

bandwidth consumption, enhance access speed and present an easy viewing screen.

By default, IE8.0 or later version does not allow Java Applets to open sockets. The user has to

explicitly modify the browser setting to enable Java Applets to use network ports.

The Managed Switch can be configured through an Ethernet connection, making sure the manager PC must be set on the same

IP subnet address as the Managed Switch.

For example, the default IP address of the Managed Switch is

192.168.0.100

, then the manager PC should be set at

192.168.0.x

(where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.

If you have changed the default IP address of the Managed Switch to 192.168.1.1 with subnet mask 255.255.255.0 via console,

then the manager PC should be set at 192.168.1.x (where x is a number between 2 and 254) to do the relative configuration on

manager PC.

Figure 4-1-1:

Web Management



Logging on the Managed Switch

Use Internet Explorer 8.0 or above Web browser. Enter the factory-default IP address to access the Web interface. The

factory-default IP Address as following:

http://192.168.0.100

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands