Planet GS-4210-16P2S User Manual Download

Page: 254 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

254

The page includes the following fields:

Object

Description

•

Port

The switch port number of the logical port.

•

Mode (pps)

Display the current mode.

•

Status (pps)

Display the current status.

•

Periodic
Reauthentication

Display the current periodic reauthentication.

•

Reauthentication
Period

Display the current reauthentication period.

•

Quiet Period

Display the current quiet period.

•

Supplicant Timeout

Display the current supplicant timeout.

•

Max. EAP Requests

Display the current Max. EAP requests.

•

Modify

Click

to edit 802.1X port setting parameter.

4.9.2.4 Guest VLAN Setting

Overview

When a Guest VLAN enabled port's link comes up, the switch starts transmitting EAPOL Request Identity frames. If the number

of transmissions of such frames exceeds Max. Reauth. Count and no EAPOL frames have been received in the meantime, the

switch considers entering the Guest VLAN. The interval between transmission of EAPOL Request Identity frames is configured

with EAPOL Timeout. If Allow Guest VLAN if EAPOL Seen is enabled, the port will now be placed in the Guest VLAN. If disabled,

the switch will first check its history to see if an EAPOL frame has previously been received on the port (this history is cleared if

the port link goes down or the port's Admin State is changed), and if not, the port will be placed in the Guest VLAN. Otherwise it

will not move to the Guest VLAN, but continue transmitting EAPOL Request Identity frames at the rate given by EAPOL

Timeout.

Once in the Guest VLAN, the port is considered authenticated, and all attached clients on the port are allowed access on this

VLAN. The switch will not transmit an EAPOL Success frame when entering the Guest VLAN.

While in the Guest VLAN, the switch monitors the link for EAPOL frames, and if one such frame is received, the switch

immediately takes the port out of the Guest VLAN and starts authenticating the supplicant according to the port mode. If an

EAPOL frame is received, the port will never be able to go back into the Guest VLAN if the "Allow Guest VLAN if EAPOL Seen"

is disabled.

The 802.1X Guest VLAN setting screens in

Figure 4-9-11

and

Figure 4-9-12

appear.

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands