Planet GS-4210-16P2S User Manual Download

Page: 158 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

158

The page includes the following fields:

Object

Description

•

Enable

Enable or disable the STP function. The default value is "Disabled".

•

BPDU Forward

Set the BPDU forward method.

•

PathCost Method

The path cost method is used to determine the best path between devices.

Therefore, lower values should be assigned to ports attached to faster media,

and higher values assigned to ports with slower media.

•

Force Version

The STP protocol version setting. Valid values are

STP-Compatible

RSTP-Operation

and

MSTP-Operation

•

Configuration Name

Identifier used to identify the configuration currently being used.

•

Configuration Revision

Identifier used to identify the configuration currently being used. The values

allowed are between 0 and 65535.

The default value is

Button

: Click to apply changes.

Figure 4-6-5:

STP Information Page Screenshot

The page includes the following fields:

Object

Description

•

STP

Display the current STP state.

•

BPDU Forward

Display the current BPDU forward mode.

•

Cost Method

Display the current cost method.

•

Force Version

Display the current force version.

•

Configuration Name

Display the current configuration name.

•

Configuration Revision

Display the current configuration revision.

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands