Planet GS-4210-16P2S User Manual Download

Page: 57 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

4.2.3 IPv6 Configuration

The IPv6 Configuration includes Auto Configuration, IPv6 Address and Gateway. The configured column is used to view or

change the IPv6 configuration. Fill out the Auto Configuration, IPv6 Address and Gateway for the device. The screens in

Figure

4-2-4

and

Figure 4-2-5

appear.

Figure 4-2-4:

IPv6 Address Setting Page Screenshot

The page includes the following fields:

Object

Description

•

Auto Configuration

Enable IPv6 auto-configuration by checking this box.

If it fails, the configured IPv6 address is zero. The router may delay responding to

a router solicitation for a few seconds; the total time needed to complete

auto-configuration can be significantly longer.

•

IPv6 Address

Provide the IPv6 address of this switch.

IPv6 address is in 128-bit records represented as eight fields of up to four

hexadecimal digits with a colon separating each field (:). For example,

'fe80::215:c5ff:fe03:4dc7'.

The symbol '::' is a special syntax that can be used as a shorthand way of

representing multiple 16-bit groups of contiguous zeros; but it can only appear

once. It also uses the following legally IPv4 address. For example, ':192.1.2.34'.

Provide the IPv6 Prefix of this switch. The allowed range is 1 through 128.

•

Gateway

Provide the IPv6 gateway address of this switch.

IPv6 address is in 128-bit records represented as eight fields of up to four

hexadecimal digits with a colon separating each field (:). For example,

'fe80::215:c5ff:fe03:4dc7'.

•

DHCPv6 Client

To enable this Managed Switch to accept a configuration from a

Dynamic Host

Configuration Protocol version 6 (DHCPv6)

server. By default, the Managed

Switch does not perform DHCPv6 client actions. DHCPv6 clients request the

delegation of long-lived prefixes that they can push to individual local hosts.

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands