Planet GS-4210-16P2S User Manual Download

Page: 88 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S



Auto

- Setup Auto negotiation.



Auto-10M

- Setup 10M Auto negotiation.



Auto-100M

- Setup 100M Auto negotiation.



Auto-1000M

- Setup 1000M Auto negotiation.



Auto-10/100M

- Setup 10/100M Auto negotiation.



10M

- Setup 10M Force mode.



100M

- Setup 100M Force mode.



1000M

- Setup 1000M Force mode.

•

Duplex

Select any available link duplex for the given switch port. Draw the menu bar to

select the mode.



Auto

- Setup Auto negotiation.



Full

- Force sets Full-Duplex mode.



Half

- Force sets Half-Duplex mode.

•

Flow Control

When Auto Speed is selected for a port, this section indicates the flow control

capability that is advertised to the link partner.

When a fixed-speed setting is selected, that is what is used.

Current Rx column indicates whether pause frames on the port are obeyed.

Current Tx column indicates whether pause frames on the port are transmitted.

The Rx and Tx settings are determined by the result of the last Auto-Negotiation.

Check the configured column to use flow control.

This setting is related to the setting for Configured Link Speed.

Possible state are:

Enabled

– Enable the flow control function.

Disabled

– Disable the flow control function.

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands