Planet GS-4210-16P2S User Manual Download

Page: 91 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

Figure 4-3-4:

Interface Counters Page Screenshot

Object

Description

•

ifInOctets

(Received Octets)

The total number of octets received on the interface, including framing

characters.

•

ifInUcastPkts

(Received Unicast

Packets)

The number of subnetwork-unicast packets delivered to a higher-layer protocol.

•

ifInNUcastPkts

(Received Nuknown

Unicast Packets)

The number of packets received via the interfaces which were discarded

because of an unknown or unsupported protocol.

•

ifInDiscards

(Received Discards

Packets)

The number of inbound packets which were chosen to be discarded even though

no errors had been detected to prevent their being deliverable to a higher-layer

protocol. One possible reason for discarding such a packet could be to free up

buffer space.

•

ifOutOctets

(

Transmit Octets)

The total number of octets transmitted out of the interface, including framing

characters.

•

ifOutUcastPkts

(Transmit Unicast

Packets)

The total number of packets that higher-level protocols requested is transmitted

to a subnetwork-unicast address, including those that were discarded or not sent.

•

ifOutNUcastPkts

(

Transmit Nuknown

Unicast Packets)

The total number of packets that higher-level protocols requested betransmitted

to a subnetwork-unicast address, including those that were discarded or not sent.

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands