Planet GS-4210-16P2S User Manual Download

Page: 81 / 431

User’s Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S

The page includes the following fields:

Object

Description

•

Server Address

Indicates the SNMP trap destination address. It allows a valid IP address in

dotted decimal notation ('x.y.z.w'). It can also represent a legally valid IPv4

address. For example, '::192.1.2.34'.

•

SNMP Version

Indicates the SNMP trap supported version. Possible versions are:



SNMP v1

: Set SNMP trap supported version 1.



SNMP v2c

: Set SNMP trap supported version 2c.

•

Notify Type

Set the notify type in traps or informs.

•

Community Name

Indicates the community access string when send SNMP trap packet.

•

UDP Port

Indicates the SNMP trap destination port. SNMP Agent will send SNMP message

via this port, the port range is

65535

•

Time Out

Indicates the SNMP trap inform timeout. The allowed range is

300

•

Retries

Indicates the SNMP trap inform retry times. The allowed range is

255

Button

: Click to add a new SNMPv1, 2 host entry.

Figure 4-2-32:

SNMPv1, 2 Host Status Page Screenshot

The page includes the following fields:

Object

Description

•

Server Address

Display the current server address.

•

SNMP Version

Display the current SNMP version.

•

Notify Type

Display the current notify type.

•

Community Name

Display the current community name.

•

UDP Port

Display the current UDP port.

•

Time Out

Display the current time out.

Summary of Contents for GS-4210-16P2S
















































































































































































































































































































































































































































Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands

Planet GS-4210-16P2S, User Manual

Search results

Summary of Contents for GS-4210-16P2S

Reviews:

Related manuals for GS-4210-16P2S

Brands by name

Popular brands